How to use OWLTRA rodent Trap?

How to use Owltra Mouse Trap?

          1. Turn the switch to OFF (“0”) and insert 4 AA batteries into the compartment.
          2. Remove the top of the trap and use only a pea-sized amount of peanut butter in the bait area. Do not let the bait touch the metal plate as it may cause a malfunction.
          3. Turn the switch to the ON (“I”) position. The light will flash green for 1 second to indicate that it has been activated. When a rodent is caught, the light will blink green every 10 seconds. If the battery is low, the light will blink red.
          4. Place the trap on a clean, dry surface along a wall.

Rat Trap

Rat Trap Set Up Step

1.Turn the switch to OFF .Position, inset the 4 C batteries

2.Put bait into the bait cup

3.Put bait into the bait cup.

 

4.Position, Green light will flash to complete the set up.

5.Place the trap along the wall at the area where rat activity is frequently, the Entrance of the killing chamber forward Outside.

Rat Trap Cleaning Step

1.Turn the switch to OFF

2.Remove the rat in the killing chamber

3.Separate the upper main body and the lower killing chamber

4.Clean the killing chamber.And dry completely before next use. Note:Do not get any water on the upper Electric body.

Mouse Trap

Mouse Trap Set Up Step

1.Turn the switch to OFF .Position, inset the 4 C batteries

2.Put bait into the bait cup

3.Put bait into the bait cup.

 

4.Position, Green light will flash to complete the set up.

5.Place the trap along the wall at the area where rat activity is frequently, the Entrance of the killing chamber forward Outside.

Mouse Trap Cleaning Step

1.Turn the switch to OFF

2.Remove the rat in the killing chamber

3.Separate the upper main body and the lower killing chamber

4.Clean the killing chamber.And dry completely before next use. Note:Do not get any water on the upper Electric body.